謂所
m122
=== Diagnostics ===
RepRapFirmware for LPC176x based Boards (mkssgenl_2.0) version 3.2_1 running on LPC176x at 120Mhz
Used output buffers: 3 of 16 (16 max)
=== RTOS ===
Static ram: 4956
Dynamic Memory (RTOS Heap 5): 8840 free, 8840 never used
Allocations: 169 Frees: 13
Never used RAM 256, free system stack 62 words
Tasks: NETWORK(ready,187) HEAT(blocked,245) MAIN(running,266) IDLE(ready,21)
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:06:43 ago, cause: [software]
Last software reset at 2021-04-09 11:15, reason: User, GCodes spinning, available RAM 256, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0042a000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x04
Aux0 errors 0,0,0
Supply voltage: under voltage events: 0
Driver 0: position 0, no-driver-detected
Driver 1: position 0, no-driver-detected
Driver 2: position 0, no-driver-detected
Driver 3: position 0, no-driver-detected
Driver 4: position 0
Driver 5: position 0
Driver 6: position 0
Date/time: 2021-04-09 11:22:14
Slowest loop: 126.16ms; fastest: 0.11ms
Step timer: target 0 count 403517376 delta -403517376 late 0
USBSerial connected 0
ADC not ready 0 ADC error threshold 10 ADC Init 1
Ints: 0; Calls 0; fast: 4294967295uS; slow 0uS adj 0 bad 0 big delta 0
PWM Channels
Delta 754015611 Start -1 End -1
=== Storage ===
Free file entries: 4
SD card 0 detected
SD card longest read time 1.7ms, write time 1.6ms, max retries 0
=== Move ===
DMs created 40, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0, chamberHeaters = -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 118.80ms; fastest: 0.10ms
Responder states: HTTP(2) HTTP(0)
HTTP sessions: 1 of 2
- WiFi -
Network state is active
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.25-01L-D
WiFi MAC address 76:7d:24:a2:d6:18
WiFi Vcc 3.36, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 36048
WiFi IP address 192.168.123.27
WiFi signal strength -38dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00181001
Socket states: 0 0
?心有灵犀 :)麻烦看看
